Document Imaging > Support Center > i260 Scanner
i260 Scanner Discontinued Product

Operating System Compatibility Definitions

Supported – Kodak Validated

  • Windows 98SE
  • Windows ME
  • Windows 2000
  • Windows XP Pro SP2/SP3 (32-bit and 64-bit)
  • Windows Vista SP1 (32-bit and 64-bit)

Not Supported – Customer Validated

  • Windows 7 SP1(32-bit and 64-bit)

Not Supported – Not Validated

  • Windows 95
  • Windows NT
  • Windows 2003 Server x64 Edition
  • Windows 2008 Server  x64 Edition
  • Windows 8.x (32-bit)
  • Windows 8.x (64-bit)
  • Linux
  • Mac

NOTES:

FOR Windows 98SE ONLY, USE THIS UNINSTALL PROCEDURE

  1. Run the Uninstaller (Note: For all other Operating Systems, the Uninstall is complete and correct, go to step 8)
  2. Delete the following directory/folder and any sub-directories/folders:
    C:\windows\twain_32\kodak\kds_i200
  3. Delete the following directory/folder and any sub-directories/folders:
    C:\Program Files\Kodak\Document Imaging
  4. Delete file: C:\windows\system\kdssti.dll
  5. Delete file: C:\windows\inf\other\kdssti.inf (Note: inf is a hidden directory)
  6. Delete file: C:\windows\system32\drivers\kdsmm.sys
  7. Delete files: C:\windows\PIXTRAN\Eki200*.*
  8. Restart Windows
  9. Install the required version of SVT

FOR Windows 7 32-bit ONLY, USE THIS PROCEDURE

Accessing Device Manager and Device list:

  1. Right click the Computer icon
  2. Select Manage from the list that pops up. The Computer Management window will appear
  3. Select Device Manager from the list on the left of the window
  4. Double click "IEEE 1394 Bus host controllers" from the device list.
  5. Verify driver files:
  • If the device name is "1394 OHCI Compliant Host Controller (Legacy)", verify the correct files are installed. Otherwise proceed to Installation of Driver Files below.

Driver Verification

  1. Double click the "1394 OHCI Compliant Host Controller (Legacy)", device name. The controller properties window will open.
  2. Select the Driver tab.
  3. Left click Driver Details button from the window.
  4. Check that the Driver files list shows 2 files:
    1394bus.sys and ohci1394.sys
  5. If these are the current driver files, you may close out of Computer Management and proceed with testing. If not, close the Driver Details window and continue with the Installation of Driver Files step 2.

Installation of Driver Files:

  1. Double click the 1394 host controller device name. The controller properties window will open
  2. Select the Driver tab. Click the Update Driver button
    1. Select "Browse ..... software". Click Next
    2. Select "Let me ..... computer". Click Next
    3. Highlight "1394 OHCI Compliant Host Controller (Legacy)" in the driver list.  Click Next
    4. Close the installation finished window when it appears
    5. Click the Driver Details button from the Properties window
    6. Verify the files 1394bus.sys and ohci1394.sys are listed
    7. Close the properties and management windows.
Contact Us
phoneSales
1-800-944-6171
M-F, 8AM - 5PM ET
How to Buy
formContact Request
wrenchSupport Center 
1-800-822-1414
 Contact Support

Linked In
Twitter
Facebook
Blog
Service Offerings
Capture Pro Trial Download
Scanner Selector Global Promo  
More Departmental