India [ change ]

KODAK DITR Film 4401/6.5mil/Matte
Share
Thermal Imagers

KODAK DITR Film / 4401 / 6.5 mil / Matte is qualified for use on the following Kodak thermal imagers equipped with a debris removal system:  

         KODAK FLEXCEL NX Imager
         KODAK TRENDSETTER SPECTRUM Thermal Imager
         KODAK TRENDSETTER 400 and 800 Platesetters
Size

KODAK DITR 4401 Film is supplied in the following cut sheet and roll sizes. Rolls will be wound with the coated side out.

591 x 794 mm (23.3 x 31.3 in) 30 sheets
600 x 750 mm (23.6 x 29.5 in) 40 sheets
762 x 762 mm (30 x 30 in) 40 sheets
750 x 1000 mm (29.5 x 39.4 in) 40 sheets
794 x 1048 mm (31.3 x 41.3 in) 25 sheets
838 x 1123 mm (33 x 44.2 in) 20 sheets
762 mm (30 in) 30 m (98.4 ft) roll
1270 mm (50 in) 30 m (98.4 ft) roll
Base Film Material: polyester
Thickness: 6.5 mil (0.0065 in)
Coated: matte
Visual Appearance Black
Dmin 0.10 UV TOD; ~0.05 Ortho TOD - bluish in appearance
Dmax >4.0 UV TOD; >2.0 Ortho TOD - black in appearance (blocks UV)
Resolution 2% to 98% @ 175 lpi
Dependent upon capabilities of imaging device.
Safelight recommendations Unexposed KODAK DITR 4401 Film has some sensitivity to prolonged white light exposure. For best results, handle film under yellow or UV-modified fluorescent light. Protect exposed film the same as unexposed film.
Film cleaning Water or water/alcohol cleaners are NOT recommended as they will attack the matte surface of the film.
Opaquing Ferric oxide or other water-based opaque is recommended for minor blemishes.
Film handling This film is susceptible to fingerprinting and scratching more than traditional graphic arts conventional films. Care should be taken when handling.
Dot etching This film cannot be wet or dry etched.
Shelf life and storage Unexposed film shelf life is 18 months. The expiration date is printed on the product label. Ideal storage conditions are in the original packaging, kept flat in a cool, dry, dark place: 32 - 70°F (0 - 21°C) and 50% RH. Exposed film is best stored the same as unexposed film. 
Disposal Film can be disposed of as normal office waste.
 Sales Info Image Contact Us
phone Sales:
+91 22 6641 6382
+91 22 6641 6362
 wrench Service & Support:
Toll Free: 1800228989
+91 22 6641 6824
+91 22 6641 6342
form Contact Request

Connect with Us

 

Flexcel NX System


Print smoother, higher-density solids without laying down more ink.

Learn More