Plate | SRH | SRM | SRC |
| Plate thickness | 1.14 mm / 0.045 in
1.70 mm / 0.067 in
2.28 mm / 0.090 in
2.54 mm / 0.100 in
2.72 mm / 0.107 in
2.84 mm / 0.112 in | 1.14 mm / 0.045 in
1.70 mm / 0.067 in
2.28 mm / 0.090 in
2.54 mm / 0.100 in
2.72 mm / 0.107 in
2.84 mm / 0.112 in | 2.84 mm / 0.112 in
3.18 mm / 0.125 in
3.94 mm / 0.155 in
4.32 mm / 0.170 in
4.70 mm / 0.185 in
5.00 mm / 0.197 in
5.50 mm / 0.217 in
6.00 mm / 0.236 in
6.35 mm / 0.250 in
7.00 mm / 0.276 in |
| Resolution | 1 to 95% @ 150 lpi | 1 to 95% @ 150 lpi | 3 to 95% @ 133 lpi |
| Isolated dot reproduction | 100 – 130 μm | 100 – 130 μm | 150 – 200 μm |
| Fine line reproduction | 70 – 100 μm | 70 – 100 μm | 100 μm |
Plate hardness
Shore A | SRH 1.14 mm: 73
SRH 1.70 mm: 64
SRH 2.28 mm: 62
SRH 2.54 mm: 60
SRH 2.72 mm: 60
SRH 2.84 mm: 59 | SRM 1.14 mm: 70
SRM 1.70 mm: 60
SRM 2.28 mm: 57
SRM 2.54 mm: 54
SRM 2.72 mm: 53
SRM 2.84 mm: 53 | SRC 2.84 mm: 39
SRC 3.18 mm: 37
SRC 3.94 mm: 35
SRC 4.32 mm: 37
SRC 4.70 mm: 37
SRC 5.00 mm: 36
SRC 5.50 mm: 36
SRC 6.00 mm: 36
SRC 6.35 mm: 36
SRC 7.00 mm: 35 |
| Wash-out solution | Compatible with most wash-out solvents |
| Recommended wash-out solvent temperature | 20 – 35oC (68 – 95oF) |
| Ink compatibility | Aqueous, solvent-based, UV-cured and cationic inks |
| Storage and handling | Unopened plate packs should be stored flat and away from excessive cold, heat and humidity. Use in a controlled environment of 10 – 25oC (50 – 77oF) and 40 – 55% RH. |
