i700 Series Scanner Firmware
Release Notes 2.4.0
A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is reccomended. Please read the information at the above link for more information.
NOTE: DO NOT ATTEMPT TO INSTALL AN i700 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.
If the computer that is connected to the KODAK i700 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes at the top of this page.
- Click on Install InstallFW_i700_v2.4.exe and download to a temporary directory on your computer.
- Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner. Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
- Double click on the file, InstallFW_i700_v2.4.0.exe.
- When download is completed, cycle power on the scanner.
The current Firmware version of your scanner can be checked by launching the "Scanner Validation Tool" (SVT) program found in the Start > All Programs > Kodak Document Imaging program group. Then choose the TWAIN driver, Setup, Settings, Device, Diagnotics, Logs.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.
File Name: InstallFW_i700_v2.4.exe
File Size: 4.6 MB