i160 Scanner
KODAK i160 Scanner
Spec Sheet
Demo
Perfect Page Scanning
Loading...

Recommended Daily Volume

  • Up to 3000 pages per day

Throughput Speeds: (Landscape, Letter Sized, Bitonal, Grayscale, Color)

Resolution (Duplex)

  • Up to 53 pages per minute/106 images per minute at 150 dpi, up to 40 pages per minute/80 images per minute at 200 dpi

In dual stream output mode:*

  • Up to 53 pages per minute/212 images per minute at 150 dpi, up to 40 pages per minute/160 images per minute at 200 dpi

*scanning with simultaneous output of bitonal and color, or bitonal and grayscale, images (Throughput speeds may vary depending on your choice of driver, application software, operating system and PC.)

Scanning technology

  • Dual Tricolor Plus CCD
  • Grayscale output bit depth is 256 levels (8-bit)
  • Color capture bit depth is 40-bit (10 bits per red, green, blue and black channels)
  • Color output bit depth is 24-bit

Optical resolution

  • 300 dpi

Illumination

  • Single 2500 hour+ Xenon lamps

Output resolutions

  • 75,100,150, 200, 240, 300, 400, 600 dpi

Maximum document size

  • 297 mm x 432 mm (11.7 in. x 17 in.)

Minimum document size

  • 64 mm x 89 mm (2.5 in. x 3.5 in.)

Paper thickness and weight

  • Onionskin to card stock

Feeder

  • Automatic Document Feeder for continuous loading of up to 150 sheets of 60 g/m2 (16 lb.) paper

Multi-Feed Detection

  • 3-D multi-feed detection with ultrasonic technology

Connectivity

  • IEEE-1394 (FIREWIRE) Interface (card and cable included), 6-pin connector

Bundled Software

  • TWAIN and ISIS drivers
  • KODAK Capture Software Lite

Imaging Features (in the scanner)

  • Perfect Page Scanning with iThresholding
  • Autocrop
  • Aggressive Crop
  • Deskew
  • Electronic Color Dropout
  • Halftone Removal
  • Noise Removal
  • VRS Compatible

On-board compression

  • CCITT Group IV; JPEG or uncompressed output

File Format Outputs

  • JPEG (for color and grayscale images
  • TIFF (for bitonal images)

Electrical Requirements

  • 100-240 V; 50-60Hz

Environmental Factors

  • Mercury-free Xenon lamps
  • Operating temperature: 15-30° C (59-86° F)
  • Operating humidity: 15% to 76% RH

Acoustical Noise (operator position Sound Pressure level)

  • Standby mode: 38.2 dB(A)
  • Operating mode: 53.8 dB(A)

PC Configuration

  • Minimum: PENTIUM III 1 GHz processor, 256 MB RAM
  • Recommended: PENTIUM IV 2.4 GHz processor, 512 MB RAM

Supported Operating Systems

  • WINDOWS 98SE
  • WINDOWS ME
  • WINDOWS 2000
  • WINDOWS XP

Approvals and product certifications

  • UL 60950 2000-1, C-UL CAN/CSA-C22.2 No. 60950-1-03, TUV EN 60950- 1:2001, CE Mark, 47 CFR Part 15 Subpart B (FCC) Class B, ICES-003 Issue 3 Class B, EN 55022:98 Class B, EN 61000-3-2 Powerline Harmonics, EN 61000-3-3 Flicker, EN 55024, AS/NZS CICPR 22 Class B (C-Tick Mark), CNS 13438 Class B, VCCI Class B, CISPR 22 Class B

Consumables Available

  • Feed Module
  • Separator Module
  • Calibration Targets
  • Feeder Consumables Kit
  • Extra-Large Feeder Consumables Kit

Accessories

  • Replaceable imaging guides
  • White imaging background accessory

Dimensions and Weight

  • Height: 36.5 cm (14.4 in.)
  • Width: 54.7 cm (21.5 in.)
  • Depth: 30.0 cm (11.8 in.)
  • Weight: 10.4 kg (23.0 lbs.)

Specifications are subject to change without notice. Throughput speeds may vary depending on your choice of driver, application software, operating system and PC.

Sales
Loading...
1-800-944-6171
(8AM - 5PM ET)
Information Request Form >
For information on Böwe Bell + Howell scanners, call:
1-800-SCAN-494
Get Support
Loading...
1-800-822-1414
(8AM - 8PM ET)
Visit the Support Center >
For Böwe Bell + Howell scanners, call:
1-800-SCAN-495
Service Offerings
More Departmental
Loading...