Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source and the latest ISIS Driver for the i200 Series Scanners.

All i200 Series Scanners, with or without the Flatbed Accessory, should be brought up to this level of Host Software, and the Firmware MUST be updated to v 2.5.5 i200 Firmware after the new driver is installed. If this isn't done the scanner will not work properly.

Software Driver CD Version 3.18 included with the latest SVT - July 2007

i250, i260 and i280 Scanner:

• ISIS driver 1.1.10506.20001
• SVT 5.24
• TWAIN v6.65.8
• STI driver v2.5 (signed)

IMPORTANT Note for KODAK Capture Software Users

• If you install the latest SVT 5.24 and Firmware 2.5.5 you must use KODAK Capture Software Version 6.6 or higher in order for the scanner to work properly. Download the Lite version of Capture Software. To upgrade to the latest Full version of Capture Software, contact your Regional (local) Kodak Support Center.

IMPORTANT NEW FEATURES OF THIS SOFTWARE

• Adds the ability to accept custom color tables created with the Brightness and Contrast Control
• Adds iThresholding feature to the i250 and i260 scanners. Note: if you are using Kodak Capture Software you will need to upgrade to Version 6.6 or higher to use this new feature (see above Note on using KODAK Capture Software).
• Allows the i280 to scan as a single image documents up to 34" long.
• After SVT is installed, a reboot is required.
• SVT will no longer overwrite newer versions, you MUST UNINSTALL to load "older" versions

Download Installation software for the i200 v3.18:
File Name: InstallSoftware_i200_v3.18.exe
File Size: 7.1 MB

Download Brightness and Contrast Control:
File Name: BCC_2_10_0.exe
File Size: 817 K

For Windows 7 64-bit ONLY
Download the following zip file:
File Name: i200_Win7_64bit.zip
File Size: 2.4 MB